How to connect a TV
These are generic
instructions meant to serve
only as a guideline.
Refer to your TV owner's manual for specific
instructions for your set. Your TV should be cable-ready and able to
receive at least 80 cable channels.
Connection Instructions
- Connect the TV to the
cable wall jack using a coaxial cable. If the TV has more than one
input connector, select the one labeled "CABLE" or "CATV".
- Plug the TV power cord into an electrical outlet and turn the TV power on.
- Configure
your set to receive CABLE or CATV signals. This is usually accessed
through a MENU or SETUP option on the TV's remote control.
- Program
the TV to receive channels. This is usually accessed through the same
MENU or SETUP option used above. Locate an option labeled AUTOPRORAM or SCAN
and select it. The TV will locate and store all of the working channels.
Your TV should now receive all on-campus
channels.